| KNOWING THE PRODUCT! |
|
| |
|
|
|
Starting Off
Clean your wall surface and remove any dirt, oils.
Planning
Plan how each decal fit on your wall. You may cut out the decals one by one to fit on
your wall. Just toy with your creativity!
Applying
The idea is to transfer the decals from the white backing to the clear transfer tape and to
the walls. This is to eliminate any air bubbles and to ease the process of putting the decals
on your walls. You may choose to ignore this step by directly peeling up the decals to stick
on the wall but it is going to be messy. The steps below are recommendable. |
| .......................................................................................................................... |
 |
Transferring decals from white backing to clear transfer tape
Lay the decals with graphics side down. Rub firmly on the white backing over
the entire decal using squeegee. The decals should now be transfered to the
clear transfer tape. |
| |
|
|
|
| .......................................................................................................................... |
 |
Removing the white backing
Carefully lift off the white backing starting from one side corner.
NOTE: If the decal is not properly adhered to the clear transfer tape, gently
push it back onto the white backing and rub again with medium pressure, only
the area that is not adhered to the clear transfer tape. Try lifting again. |
| |
|
|
|
| .......................................................................................................................... |
 |
Transferring decals from clear transfer tape to your wall
Once the white backing is removed, adhere the clear transfer tape with your
decals onto the wall.For proper adhering, rub the decal evenly starting from
the top of the decal in a downward motion from left to right all the way to the bottom of the decal. |
| |
|
|
|
| .......................................................................................................................... |
 |
Removing clear transfer tape
Carefully peel off the clear transfer tape, and pull down at 45 degree angle. The decal should adhere to the wall. At this point, if the decal still adhered to the clear transfer tape, place the clear transfer tape back on the wall surface and rub the decal
again. Repeat step if necessary. |
| |
|
|
|
